Mercedes-Benz E-Class W214 Passenger Entertainment Screen Installation

Read the source product image

This reading guide follows the original product photo for CKCP source archive. It translates visible labels and explains the limits of the specifications printed in that image. It does not confirm vehicle fitment or an installation procedure.

Visible screen labels

Close

关闭

Two low-contrast characters read in the enlarged source crop. This translates the visible label, not the behaviour of a specific control.

Menu

菜单

Visible label beside an icon. The icon does not establish climate-control integration or unseen menu functions.

Only the photographed labels are translated. The back, home and previous/next icons are pictured without additional Chinese text; unseen screens and functions are not described.

Printed harness tag

Audio CAN

音频CAN

Visible printed tag only. It does not identify CAN pins, a vehicle connector, signal direction or an approved wiring procedure.

The small red tag is not confidently readable here. Its wording remains unresolved; no warning or wiring instruction is guessed.

Four items named in the image

Passenger entertainment screen assembly

副驾娱乐屏总成

Source image item name; not connector or electrical identification.

Video cable

视频线

Source image item name; not connector or electrical identification.

Adapter cable

转接线

Source image item name; not connector or electrical identification.

USB cable

USB连接线

Source image item name; not connector or electrical identification.

These are the source item names. They do not establish connector identities or electrical connections.

Source-stated scope and specifications

The source image claims suitability for the 2024 Mercedes-Benz E-Class W214.

适用于2024款奔驰E级-W214

This is the source heading, not confirmed compatibility for all model years, configurations, firmware or kits.

Passenger entertainment screen

中控副驾娱乐屏

Source product description; no additional control functions are inferred.

The source claims installation without damage to the original vehicle.

无损安装：无损安装，不损原车

This is not a guarantee; the image does not verify installation safety or the outcome for every vehicle.

The source lists mobile-data SIM, Wi-Fi and Bluetooth signals, and a vehicle-speaker interface.

接口：流量卡信号，WIFI信号，蓝牙信号，车机喇叭接口

No pinout, connector identity, carrier support or audio-routing method is confirmed.

The source lists a Qualcomm Snapdragon 6125 processor.

芯片：高通骁龙6125芯片

The pictured hardware has not been independently identified or tested.

The source lists 1920 × 720 display resolution.

屏幕：屏幕1920*720分辨率

This is a stated specification, not a measured display result.

The source claims BeiDou and GPS positioning support.

导航：支持北斗+GPS定位

This does not confirm maps, navigation applications or positioning performance.

The source describes a smart touchscreen.

触摸：智能触屏

No unseen gestures, applications or control functions are inferred.

The source claims global 4G connectivity and lists LTE-TDD/LTE-FDD.

网络支持：4G网络全球全网通/LTE-TDD/LTE-FDD

Supported cellular bands, countries, carriers and service compatibility remain unconfirmed.

The source claims dual-band high-speed Wi-Fi, printed as 2.5/5 GHz, and lists 802.11a/b/g/n/ac.

WLAN信息：双频高速WIFI芯片2.5/5Ghz 802.11a/b/g/n/ac

The printed 2.5 value is retained without correction. Confirm the actual Wi-Fi specification; no measured speed or band support is accepted.

Manufacturer confirmation is still needed for fitment, actual Wi-Fi specifications, cellular bands/carriers and installation safety. The harness label does not resolve CAN pins, supply/ground connections or audio routing. No audio, full-video or technical acceptance is provided by this reading guide.

This guide follows the CKCP installation video linked from the original passenger-screen tutorial. The product image identifies a 2024 Mercedes-Benz E-Class W214; the video demonstrates one vehicle and one kit. Confirm the screen assembly and harness for your vehicle configuration with CKCP before installation.

Product and supplied cables

The original product image labels four items:

1. Passenger entertainment screen assembly.
2. Video cable.
3. Adapter cable.
4. USB cable.

The image also lists a Snapdragon 6125 processor, 1920 × 720 display resolution, BeiDou/GPS positioning, touch operation, Bluetooth, and a vehicle-speaker interface. These are specifications stated in the source image. Its Wi-Fi line reads “2.5/5 GHz,” and its cellular line claims global 4G with LTE-TDD/LTE-FDD. Obtain the confirmed Wi-Fi specification and supported cellular bands/carriers for your kit; the image does not establish service compatibility in your country. The source's “no damage” installation claim is not a guarantee for every vehicle or installation.

The reading panel below the retained full-length player follows its four previously reviewed excerpts. Other full-length windows remain unreviewed.

This local partial version corrects four English subtitle phrases only. The voice track, Chinese picture overlays, other 25 subtitles and full synchronization still require review.

Additional source-picture reading card · source-film 85.5 s

Visible source-picture caption at source-film 85.5 seconds. This adds the caption to the 47–100-second reading area; the earlier full-length English comparison already contains this wording. No unseen clip count, removal force or technical approval is inferred.

Source-film 47–100 s picture-caption excerpt

This separate 53-second excerpt from source-film 47–100 seconds replaces the mismatched English footer in this selected interval with 11 grouped translations of visible source-picture captions. Only conservative sampled windows are translated. The unchanged original narration is retained and starts muted; it has not been corrected or accepted. Chinese picture labels remain. The earlier 0–47-second excerpt and original full-length comparison remain available below. Player times here are relative to source-film 47 seconds. This excerpt does not establish full audiovisual or technical approval.

Read the source-picture caption

Pause at each reviewed caption for reading

2.50–4.53 s 9.50–11.03 s 11.50–13.03 s 13.50–16.03 s 17.00–20.03 s 21.00–25.53 s 26.00–30.03 s 30.50–35.53 s 36.50–40.53 s 41.00–42.03 s 46.50–53.00 s

Source-caption windows are loading.

Source-film 100–220 s picture-caption excerpt

This separate 120-second excerpt from source-film 100–220 seconds replaces the mismatched English footer in this selected interval with 25 grouped translations of visible source-picture captions. Only conservative sampled windows are translated. The unchanged original narration is retained and starts muted; it has not been corrected or accepted. Chinese picture labels remain. The earlier 0–47-second and 47–100-second excerpts and original full-length comparison remain available below. This excerpt stops at 220 seconds; the complete film lasts 220.2 seconds. Player times here are relative to source-film 100 seconds. This excerpt does not establish full audiovisual or technical approval.

Read the source-picture caption

Pause at each reviewed caption for reading

0.00–2.30 s 3.50–6.53 s 7.27–11.30 s 11.50–13.53 s 14.27–16.80 s 17.00–22.53 s 23.50–28.53 s 28.77–34.80 s 35.00–36.30 s 36.77–41.80 s 42.27–43.80 s 44.00–49.30 s 49.77–56.30 s 57.00–64.03 s 67.27–74.53 s 75.00–76.80 s 78.50–84.30 s 84.50–87.80 s 88.00–91.30 s 91.77–94.03 s 94.27–99.80 s 100.00–104.30 s 105.00–113.03 s 113.27–115.30 s 115.50–119.80 s

Source-caption windows are loading.

Opening source-picture caption excerpt

This separate opening 47-second excerpt replaces the early mismatched English footer with 9 grouped translations of visible source-picture captions. Only conservative sampled windows are translated. The unchanged original narration is retained and starts muted; it has not been corrected or accepted. Chinese picture labels remain. The four-phrase version of the full demonstration remains available below and covers different later windows. This excerpt does not establish full audiovisual or technical approval.

Read the source-picture caption

Pause at each reviewed caption for reading

7.50–9.03 s 9.50–11.03 s 11.50–16.03 s 17.00–20.03 s 21.60–22.43 s 29.00–35.03 s 38.50–41.03 s 42.00–44.03 s 45.00–46.53 s

Source-caption windows are loading.

Only four subtitle excerpts have been checked. Other time windows and the voice track still require review.

These controls navigate the four excerpts. They do not confirm the other subtitles or the audio.

Original English video retained for comparison:

The times below are navigation points in this approximately 3 minute 40 second video. They describe the demonstrated sequence. The source does not provide the vehicle power-isolation procedure, a harness pinout, fuse rating, tightening torques, or reset-device operation. Obtain the kit instructions and the applicable vehicle service procedure before carrying out the work.

Remove the instrument display and glovebox area

1. 00:16–00:36 — Instrument-display rear trim. Use the trim tool at the rear trim behind the driver's instrument display and release its clips. Remove the two T20 screws exposed beneath it, one on each side.
2. 00:38–00:46 — Instrument display. Release the two clips shown, lift the instrument display upward, and disconnect its rear connector. This is the driver's instrument display, separate from the new passenger entertainment screen.
3. 00:49–01:03 — Passenger dashboard end cap and glovebox fasteners. Pry off the passenger-side dashboard end cap. Remove the screw exposed behind it and the three glovebox fasteners indicated in the video.
4. 01:03–01:22 — Door sill, lower panel, and glovebox. Lift out the passenger door-sill trim. Remove the T20 screw shown in the panel beneath the glovebox and remove that panel. Remove the additional T20 screw shown in the glovebox area. Release and lift out the glovebox assembly, then disconnect its connectors. The door-sill trim shown here is not a foot pedal.

Open the centre console and release the dashboard assembly

5. 01:22–01:42 — Centre-console decorative trim and covered compartment assembly. Release the clips of the decorative top trim around the centre-console compartment and disconnect its lighting connector. Remove the two screws indicated below the trim, lift out the covered compartment assembly, and disconnect the lighting connectors shown behind it.
6. 01:43–01:56 — Centre-console mounting screws. Remove the two Phillips screws exposed beneath the compartment assembly. Release the small trim pieces on the left and right sides to reach a hidden T20 screw on each side; remove both.
7. 01:57–02:09 — Centre armrest storage compartment. Open the storage compartment between the front seats, lift the insert, and remove the two Phillips screws shown inside. This is the centre-console storage compartment, separate from the passenger glovebox. Release and reposition the centre console as demonstrated to open access below the dashboard.
8. 02:09–02:24 — Remaining dashboard access fasteners. Remove the two fasteners indicated at the passenger end and beside the engine start/stop button, then remove the trim component shown. Reach through the exposed opening to remove the two T20 screws indicated beneath the central display. Remove the additional side screw shown next.
9. 02:24–02:36 — Large dashboard panel/display assembly. Release the assembly gradually with the trim tool. The video specifically warns that its clips are tight. Support the assembly as it comes free and disconnect the rear connectors shown before removing it completely.

Transfer the original display components

10. 02:37–02:57 — Rear cover and display mounting. With the removed assembly supported on the work surface, release the four rear-cover clips indicated in the video and remove the cover. Remove the four display mounting screws shown.
11. 02:58–03:14 — Display component transfer. Remove the display panel and disconnect the ribbon cable as demonstrated. Transfer the original display components into the replacement panel; the video identifies the fan and circuit board during this transfer. Refit the cover and screws. Follow the supplied kit instructions for the ribbon connectors and mounting details; no torque values are given in the video.

Identify the harness connections shown

12. 03:16–03:29 — Adapter and power connections. The video identifies an adapter connector for the cigarette-lighter connection beneath the lower panel, points out a yellow lead described as the ACC/fuse connection, and mates another connector with the black connector shown. It does not identify a fuse position, fuse rating, wire pin assignment, or complete power/ground wiring. Obtain the kit-specific wiring diagram before connecting the yellow lead or applying power; colour alone is not enough to identify a circuit.
13. 03:29–03:36 — USB and unused connectors. Keep the USB lead accessible for later use. The Chinese caption says to leave it available; the original English video's “leave the USB unused” wording is misleading. The presenter next identifies two connectors to wrap and leave unused for this demonstrated installation. Confirm those exact connectors against your harness documentation rather than treating every spare connector as unused.
14. 03:36–03:39 — Reset device. The final connector is described as connecting to a reset device (复位器). Its type, final connection, and operating sequence are not demonstrated. Obtain the instructions for the supplied reset device; the video does not establish that it is a simple reset switch or specify any button-press duration.

Completion and support

The video mentions reinstalling the assembled screen, but its ending concentrates on harness identification. It does not supply a complete trim-refitting sequence or a demonstrated final passenger-screen function check. The original written tutorial provides no troubleshooting procedure. Obtain CKCP's completion checks and kit-specific troubleshooting instructions before treating the installation as complete. When requesting help, provide your vehicle configuration, kit/harness identification, connector photos, and the relevant video time.

Corrected English source reference

Four phrases in the existing English subtitle text have been corrected against this tutorial’s own source frames. The external edit files are retained. The local partial video now shows these four corrected subtitles; the original video and voice track remain unchanged. All 29 time windows and segmentation are retained. The other 25 cues, opening alignment and full audio/video synchronization have not been approved by this correction.

Download partial English SRT for local editing · Download partial English VTT for local editing

Cue 6 — 00:01:01.980 --> 00:01:10.440

Corrected phrase: this door-sill trim (previously “this pedal”).

One here, one here. Then remove this door-sill trim too: just lift it up and it comes out. There is a screw on the base plate; remove it.

Cue 13 — 00:01:54.060 --> 00:02:01.403

Corrected phrase: the centre armrest storage compartment (previously “the glovebox”).

There's one on each side, left and right—remove both. Open the centre armrest storage compartment and lift this cover. Then inside there are two Phillips screws;

Cue 27 — 00:03:25.800 --> 00:03:33.356

Corrected phrase: keep the USB accessible (previously “leave the USB unused”).

Then connect it with this black connector—just plug them together. Then keep the USB accessible. Wrap these two connectors and don't worry

Cue 29 — 00:03:37.060 --> 00:03:39.240

Corrected phrase: reset device (previously “reset switch”).

Later, just connect it with our reset device.